Compare Models

2019 Husqvarna TC 250
2019 Husqvarna TC 250

Specs

General Information

Manufacturer
Husqvarna
Husqvarna
Model Year
2019
2019
Model
TC 250
TC 250
Model Code
TC250
TC250
Color
White / Yellow / Blue
White / Yellow / Blue

Brakes/Wheels/Tires

Brakes
Front/rear - Disc brake Ø 260/220 mm
Front/rear - Disc brake Ø 260/220 mm
Wheels

Front - 1.60 x 21 in.

Rear - 2.15 x 19 in. DID

Front - 1.60 x 21 in.

Rear - 2.15 x 19 in. DID

Tires

Front - 80/100-21 in.

Rear - 100/90-19 in.

Front - 80/100-21 in.

Rear - 100/90-19 in.

Dimensions

Weight
Without Fuel - 211.6 lb. ( 96 kg)
Without Fuel - 211.6 lb. ( 96 kg)
Ground Clearance
14.8 in. (375 mm)
14.8 in. (375 mm)
Wheelbase
58.5 in ± 0.4 in (1,485 ± 10 mm)
58.5 in ± 0.4 in (1,485 ± 10 mm)
Seat Height
37.4 in. (950 mm)
37.4 in. (950 mm)

Drivetrain

Transmission
5-speed
5-speed
Primary Drive
26:73
26:73
Final Drive

14:50

Chain - 5/8 x 1/4 in.

14:50

Chain - 5/8 x 1/4 in.

Engine

Engine
Single cylinder, 2-stroke
Single cylinder, 2-stroke
Cooling
Liquid
Liquid
Displacement
249 cc
249 cc
Bore x Stroke
66.4 x 72 mm
66.4 x 72 mm
Gear Ratio

1st - 14:28

2nd - 16:26

3rd - 18:24

4th - 21:24

5th - 22.21

1st - 14:28

2nd - 16:26

3rd - 18:24

4th - 21:24

5th - 22.21

Clutch
Wet multi-disc DDS, Magura hydraulics
Wet multi-disc DDS, Magura hydraulics
Carburetion
Mikuni TMX 38
Mikuni TMX 38
Exhaust

Silencer - Aluminum

Silencer - Aluminum

Ignition
Kokusan
Kokusan
Starting
Kickstarter
Kickstarter
Lubrication
Mixture oil lubrication 1:60
Mixture oil lubrication 1:60
Fuel Capacity
2 gal. (8 l)
2 gal. (8 l)

Operational

Frame

Central double-cradle-type 25CrMo4 steel

Subframe - Carbon fiber reinforced polyamide

Central double-cradle-type 25CrMo4 steel

Subframe - Carbon fiber reinforced polyamide

Suspension

Front - WP USD, AER 48; 12.2 in. (310 mm) travel

Rear - WP Monoshock with linkage; 11.81 in. (300 mm) travel

Front - WP USD, AER 48; 12.2 in. (310 mm) travel

Rear - WP Monoshock with linkage; 11.81 in. (300 mm) travel

Rake
26.1°
26.1°

Other

Includes

Handlebar - Pro Taper, Aluminum Ø 28/22 mm

Triple clamp offset - 22 mm

Handlebar - Pro Taper, Aluminum Ø 28/22 mm

Triple clamp offset - 22 mm

Features

FEATURES AND BENEFITES

  • ENGINE: The TC 250 engine features the latest 2-stroke architectural advancements, aimed at centralising rotating masses and reducing vibration, while delivering the highest level of performance in its class. The simplicity and low maintenance cost of the 2-stroke motor has made it a favourite amongst motocross riders for generations.
  • CYLINDER: The 66.4 mm bore cylinder features an innovative power valve system, which delivers smooth and controlled power throughout the RPM range. The exhaust port now also features a machined finished for improved port timing and performance.
  • CRANKCASE: The TC 250 engine is designed with mass centralisation in mind. As a result, the lightweight, die-cast engine casings are engineered to house a compact shaft arrangement, keeping oscillating mass low and centred, adding to the overall balance, agility and ride-ability.
  • COUNTER BALANCER SHAFT: The TC 250 features an innovative laterally mounted counter balancer shaft. This shaft significantly reduces engine vibration, resulting in a smoother and more comfortable ride.
  • FRAME: Precision engineered for an exact balance of stiffness and torsional flex, the frame features an increase in longitudinal rigidity, improving rider feedback, handling response, energy absorption and straight-line stability. The frame is finished off in a premium blue powder coating and standard frame protectors for superior protection and durability.
  • CARBON FIBRE SUBFRAME: Unique to Husqvarna Motorcycles is a composite subframe, made up of 70% polyamide and 30% carbon fibre. The new 2-piece subframe design adds a further weight saving of 250 g for 2019. The robust and crash-resistant rear end, balances comfort with stability and improved rider feedback.
  • EXHAUST HEADER: The header pipe on the 2019 TC 250 is narrower than previous models and is designed using innovative 3D modelling. The result is a refined shape with more ground clearance, making it less susceptible to damage while also improving performance.
  • WHEELS AND TYRES: CNC-machined hubs and high-strength alloy rims by D.I.D are finished in striking black. They feature laser engraved logos and are fitted with DUNLOP MX3S Motocross tyres which feature a "block-within-a-block" design for progressive cornering and superior traction on a variety of terrain.
  • WP AER 48 SUSPENSION: The 48 mm forks feature new settings and are easily adjusted via a single air pressure pre-load valve, located on the left leg, as well as easy access clickers which adjust damping and compression. Additionally, the air pump needed to adjust air pressure is included standard.
  • WP DCC REAR SUSPENSION: The WP DCC Rear Suspension features a new main piston and 300 mm rear wheel travel. With a pressure balance inside the shock, damping is consistent, which results in superior comfort and handling. The rear shock is fully adjustable and matched to a linkage system supporting a specific geometry to deliver maximum traction and with optimum shock absorption.
  • MAGURA HYDRAULIC CLUTCH: The reliable, high quality and German-made, MAGURA clutch system is near maintenance-free. This guarantees even wear and perfect modulation in all conditions, with constantly compensated modulation and play on the lever, so the pressure point and clutch remains consistent in cold or hot conditions as well as over time.
  • COMPONENT: The most progressive engineering techniques and technology complement a long list of quality componentry standard on the TC 250.
  • PRO TAPER HANDLEBAR: Featuring fatigue resistance at a minimal weight, PRO TAPER handlebars are fitted to the entire 2019 Husqvarna Motorcycles motocross range, and are manufactured to exacting standards to deliver exceptional rider comfort and control.
  • MIKUNI CARBURRETTOR: The TC 250 features a 38 mm flat slide MIKUNI TMX carburettor, which delivers a smooth and controllable power with optimal performance over the entire RPM range.
  • DDS CLUTCH: The TC 250 features a damped diaphragm steel clutch or DDS, using a diaphragm spring instead of the more common coil spring setup. This makes for lighter clutch action and allows for a damping system that increases both traction and durability.

FEATURES AND BENEFITES

  • ENGINE: The TC 250 engine features the latest 2-stroke architectural advancements, aimed at centralising rotating masses and reducing vibration, while delivering the highest level of performance in its class. The simplicity and low maintenance cost of the 2-stroke motor has made it a favourite amongst motocross riders for generations.
  • CYLINDER: The 66.4 mm bore cylinder features an innovative power valve system, which delivers smooth and controlled power throughout the RPM range. The exhaust port now also features a machined finished for improved port timing and performance.
  • CRANKCASE: The TC 250 engine is designed with mass centralisation in mind. As a result, the lightweight, die-cast engine casings are engineered to house a compact shaft arrangement, keeping oscillating mass low and centred, adding to the overall balance, agility and ride-ability.
  • COUNTER BALANCER SHAFT: The TC 250 features an innovative laterally mounted counter balancer shaft. This shaft significantly reduces engine vibration, resulting in a smoother and more comfortable ride.
  • FRAME: Precision engineered for an exact balance of stiffness and torsional flex, the frame features an increase in longitudinal rigidity, improving rider feedback, handling response, energy absorption and straight-line stability. The frame is finished off in a premium blue powder coating and standard frame protectors for superior protection and durability.
  • CARBON FIBRE SUBFRAME: Unique to Husqvarna Motorcycles is a composite subframe, made up of 70% polyamide and 30% carbon fibre. The new 2-piece subframe design adds a further weight saving of 250 g for 2019. The robust and crash-resistant rear end, balances comfort with stability and improved rider feedback.
  • EXHAUST HEADER: The header pipe on the 2019 TC 250 is narrower than previous models and is designed using innovative 3D modelling. The result is a refined shape with more ground clearance, making it less susceptible to damage while also improving performance.
  • WHEELS AND TYRES: CNC-machined hubs and high-strength alloy rims by D.I.D are finished in striking black. They feature laser engraved logos and are fitted with DUNLOP MX3S Motocross tyres which feature a "block-within-a-block" design for progressive cornering and superior traction on a variety of terrain.
  • WP AER 48 SUSPENSION: The 48 mm forks feature new settings and are easily adjusted via a single air pressure pre-load valve, located on the left leg, as well as easy access clickers which adjust damping and compression. Additionally, the air pump needed to adjust air pressure is included standard.
  • WP DCC REAR SUSPENSION: The WP DCC Rear Suspension features a new main piston and 300 mm rear wheel travel. With a pressure balance inside the shock, damping is consistent, which results in superior comfort and handling. The rear shock is fully adjustable and matched to a linkage system supporting a specific geometry to deliver maximum traction and with optimum shock absorption.
  • MAGURA HYDRAULIC CLUTCH: The reliable, high quality and German-made, MAGURA clutch system is near maintenance-free. This guarantees even wear and perfect modulation in all conditions, with constantly compensated modulation and play on the lever, so the pressure point and clutch remains consistent in cold or hot conditions as well as over time.
  • COMPONENT: The most progressive engineering techniques and technology complement a long list of quality componentry standard on the TC 250.
  • PRO TAPER HANDLEBAR: Featuring fatigue resistance at a minimal weight, PRO TAPER handlebars are fitted to the entire 2019 Husqvarna Motorcycles motocross range, and are manufactured to exacting standards to deliver exceptional rider comfort and control.
  • MIKUNI CARBURRETTOR: The TC 250 features a 38 mm flat slide MIKUNI TMX carburettor, which delivers a smooth and controllable power with optimal performance over the entire RPM range.
  • DDS CLUTCH: The TC 250 features a damped diaphragm steel clutch or DDS, using a diaphragm spring instead of the more common coil spring setup. This makes for lighter clutch action and allows for a damping system that increases both traction and durability.